一、EQUIPMENT FEATURES：

01.High efficiency

Reduced system losses and completely eliminated equipment failures from the water system.
02. Stable operation

Complete limit protection measures keep the equipment safely connected under various working conditions.

03. High reliability

High reliability and high redundancy make the device capable of 24 hours of operation and significantly improve equipment life and safe operation.

04. High technology

Power supply built-in harmonic control and power factor correction circuit measures.

二、EQUIPMENT ADVANTAGES：

1. Structural analysis: 

Based on the accurate and reliable digital ?IGBT? soft-switching technology, the air-cooled induction heating power supply adopts a fully air-cooled structure.Not only the efficiency is improved, and it will not produce scale blockage, structural water pipe leakage, water pipe aging and other failures, thereby greatly improvingImprove equipment stability and completely eliminate equipment failures from water system.This product is an output isolated secondary series resonance. Output isolation is conducive to safe operation; due to the use of digital control,To achieve extremely low inverter DC component, it is possible to adopt the secondary series resonance mode; the isolation transformer of the secondary series resonance.The device only carries active power and also adopts air-cooled structure.
 
2. Energy saving analysis:
For induction heating systems, the cooling water savings are also considerable. The internal heat dissipation system of the equipment does not require water Circulating cooling, only a small amount of cooling water is needed to cool the induction coil during high temperature heating, which greatly saves users Investment cost; if the tap water is directly discharged from cooling, the water cost loss is greater than the electricity loss caused by the equipment efficiency; if the user uses circulating water cooling or a closed water chiller, the electric power required for water cooling and the water pump Electric power should still be included in the loss.

3. The life of air-cooled equipment is longer than water-cooled equipment.